August 16, 2020

How Off-the-Shelf Tools Are Used for Ransomware

Discover how off-the-shelf tools empower cyber-criminals. Explore a ransomware incident involving a low-skilled threat actor targeting a retail organization.

Written by

Max Heinemeyer

Global Field CISO

Inside the SOC

Darktrace cyber analysts are world-class experts in threat intelligence, threat hunting and incident response, and provide 24/7 SOC support to thousands of Darktrace customers around the globe. Inside the SOC is exclusively authored by these experts, providing analysis of cyber incidents and threat trends, based on real-world experience in the field.

Written by

Max Heinemeyer

Global Field CISO

Aug 2020

Key takeaways

A retail organization based in Africa was recently targeted with ransomware
The general lack of obfuscation and use of no custom malware suggest a low-level threat actor
Threat actors of all levels increasingly use common administrative tools such as PsExec for stealth purposes
The company was relatively small, but no organization is immune to being targeted by ransomware

Attack details

Darktrace recently detected a form of ransomware at an African retailer. In the threat find that follows, the attacker connected to the organization’s domain controllers via a commonly used administrative tool and then began communicating to another C2 host.

Approximately an hour after the initial beaconing behavior, unusual RDP/SMB occurred on the network, followed by unusual service control activity. Darktrace detected each stage of the attack’s life cycle and would have automatically neutralized the attack had Darktrace Antigena been configured in active mode. However, because Autonomous Response was set up in passive mode, requiring confirmation from the human security team, the attack was able to escalate past its opening stages.

The ransomware activity commenced over the weekend, four days after the first beaconing activity. The timeline of the attack is shown below.

Timeline of attack: Overall dwell time around seven days

Figure 1: A timeline of events

How did the attack bypass the rest of the security stack?

This attack abused off-the-shelf tools that were already used by the client. This tactic, which targeted the domain controller as the initial vector, made the malware deployment easy and effective.

AI Analyst coverage

Darktrace’s Cyber AI analyst identified that the SQL server was writing a number of unusual files to shared drives, which appear to have specifically been binary executables for deployment of ransomware.

Figure 2: Darktrace’s Cyber AI Analyst revealing the unusual files

Overview of infected device

The graph below details the anomalous connections and other forms of unusual activity that occurred over a 10-hour period. Darktrace’s Enterprise Immune system first detected this activity in the compliance/remote management tool on the server, and then saw it spread laterally to other devices within the organization’s cyber-ecosystem.

Figure 3: A graph showing the number of external connections on the domain controller and anomalies detected

Concluding thoughts

In this attack, the C2 domain has an accessible array of standard PHP, including /phpMyAdmin and /p.php. The latter details the server time to be UTC+8, the time zone of mainland China.

Figure 4: The C2 domain

Here, multiple factors suggest a lower-level threat actor, including the lack of obfuscation, the reliance on off-the-shelf tools, and the comparatively small size of the target organization. With the rise of Ransomware-as-a-Service (RaaS), automated domain generation, and other tools that lower the barrier to entry for attackers, it comes as no surprise that even a low-level threat actor could breach a corporate network. This also means that smaller organizations that would have been ignored by advanced cyber-criminals may find themselves targeted by attacks launched by low-level threat actors.

Indeed, convenient and widely used tools can often be abused for access, and the tools for ransomware are fairly common and easy to deploy once a foothold has been established. This calls for a proactive response to cyber security, and full visibility into networks, to be able to spot and stop threats before they escalate into crisis.

Deploying ransomware over the weekend is a common technique to maximize chances of success for the attacker, as response times from security teams are generally slower. This falls into a broader trend of ‘out of hours’ attacks that are becoming increasingly common and shines a light on the need for defensive technology that can act autonomously and contain a threat without relying on humans. With over a dozen AI models firing, there is no doubt that in this case Darktrace’s Autonomous Response technology would have taken a targeted and proportionate response to contain the threat. In addition to Autonomous Response, AI that can investigate an incident and provide actionable intelligence so a security team can quickly take action to fully remediate an incident or address a vulnerability is critical to staying ahead of fast-changing threats.

Thanks to Darktrace analyst Roberto Romeu for his insights on the above threat find.

Learn more about Autonomous Response

Darktrace model detections:

Compromise / Suspicious Beaconing Behaviour
Compromise / Sustained SSL or HTTP Increase
Anomalous Server Activity / Rare External from Server
Anomalous Server Activity / Anomalous External Activity from Critical Network Device
Device / Network Scan
Anomalous Connection / SMB Enumeration
Device / ICMP Address Scan
Device / New or Uncommon WMI Activity
Anomalous Connection / New Service Control
Anomalous Connection / New or Uncommon Service Control
Anomalous Connection / Unusual Admin SMB Session
Anomalous Connection / Active Remote Desktop Tunnel
Anomalous Connection / Unusual Admin RDP Session
Device / Multiple Lateral Movement Model Breaches
Compliance / High Priority Compliance Model Breach
Compliance / SMB Drive Write
Compliance / Remote Management Tool On Server

‍

Written by

Max Heinemeyer

Global Field CISO

Inside the SOC

Written by

Max Heinemeyer

Global Field CISO

The Darktrace Community

Watch the NIS2 Webinar

Blog

July 1, 2025

Pre-CVE threat detection: 10 examples identifying malicious activity prior to public disclosure of a vulnerability

Can you detect cyber threats before the world knows about them?

Every year, tens of thousands of Common Vulnerabilities and Exposures (CVEs) are disclosed, over 40,000 in 2024 alone [1], and a predicted higher number for 2025 by the Forum for Incident Response and Security Teams (FIRST).

However, cybercriminals don't wait for disclosure. They exploit zero-days while defenders remain in the dark.

Traditional, signature-based tools struggle to detect these early-stage threats. That’s why anomaly detection is becoming essential for organizations seeking pre-CVE detection.

Understanding the gap between zero-day attacks and public CVE disclosure

When a vulnerability is discovered, the standard practice is to report it to the vendor or the responsible organization, allowing them to develop and distribute a patch or fix before the details are made public. This is known as responsible disclosure.

The gap between exploitation of a zero-day and the disclosure of the vulnerability can sometimes be considerable, and retroactively attempting to identify successful exploitation on your network can be challenging, particularly if taking a signature-based approach.

However, abnormal behaviors in networks or systems, such as unusual login patterns or data transfers, can indicate attempted cyber-attacks, insider threats, or compromised systems.

Detecting threats without relying on CVE disclosure

Since Darktrace does not rely on rules or signatures, it can detect malicious activity that is anomalous even without full context of the specific device or asset in question.

For example, during the Fortinet exploitation late last year, the Darktrace Threat Research team were investigating a different Fortinet vulnerability, namely CVE 2024-23113, for exploitation when Mandiant released a security advisory around CVE 2024-47575, which aligned closely with Darktrace’s findings.

Retrospective analysis like this is used by Darktrace’s threat researchers to better understand detections across the threat landscape and to add additional context.

Below are ten examples from the past year where Darktrace detected malicious activity days or even weeks before a vulnerability was publicly disclosed.

ten examples from the past year where Darktrace detected malicious activity days or even weeks before a vulnerability was publicly disclosed.

Trends in pre-cve exploitation

The attack vs. patch race

In many cases, the disclosure of an exploited vulnerability can be off the back of an incident response investigation related to a compromise by an advanced threat actor using a zero-day. Once the vulnerability is registered and publicly disclosed as having been exploited, it can kick off a race between the attacker and defender.

Skilled nation-state actors

Nation-state actors, highly skilled with significant resources, are known to use a range of capabilities to achieve their target, including zero-day use. Often, pre-CVE activity is “low and slow”, last for months with high operational security.

After CVE disclosure, the barriers to entry lower, allowing less skilled and less resourced attackers, like some ransomware gangs, to exploit the vulnerability and cause harm. This is why two distinct types of activity are often seen: pre and post disclosure of an exploited vulnerability.

Examples of exploitation

Darktrace saw this consistent story line play out during several of the Fortinet and PAN OS threat actor campaigns highlighted above last year, where nation-state actors were seen exploiting vulnerabilities first, followed by ransomware gangs impacting organizations [2].

The same applies with the recent SAP Netweaver exploitations being tied to a China based threat actor earlier this spring with subsequent ransomware incidents being observed [3].

Autonomous Response

Anomaly-based detection offers the benefit of identifying malicious activity even before a CVE is disclosed; however, security teams still need to quickly contain and isolate the activity.

For example, during the Ivanti chaining exploitation in the early part of 2025, a customer had Darktrace’s Autonomous Response capability enabled on their network. As a result, Darktrace was able to contain the compromise and shut down any ongoing suspicious connectivity by blocking internal connections and enforcing a “pattern of life” on the affected device.

This pre-CVE detection and response by Darktrace occurred 11 days before any public disclosure, demonstrating the value of an anomaly-based approach.

In some cases, customers have even reported that Darktrace stopped malicious exploitation of devices several days before a public disclosure of a vulnerability.

For example, During the ConnectWise exploitation, a customer informed the team that Darktrace had detected malicious software being installed via remote access. Upon further investigation, four servers were found to be impacted, while Autonomous Response had blocked outbound connections and enforced patterns of life on impacted devices.

Conclusion

By continuously analyzing behavioral patterns, systems can spot unusual activities and patterns from users, systems, and networks to detect anomalies that could signify a security breach.

Through ongoing monitoring and learning from these behaviors, anomaly-based security systems can detect threats that traditional signature-based solutions might miss, while also providing detailed insights into threat tactics, techniques, and procedures (TTPs). This type of behavioral intelligence supports pre-CVE detection, allows for a more adaptive security posture, and enables systems to evolve with the ever-changing threat landscape.

Credit to Nathaniel Jones (VP, Security & AI Strategy, Field CISO), Emma Fougler (Global Threat Research Operations Lead), Ryan Traill (Analyst Content Lead)

References and further reading:

Realted Darktrace blogs:

‍

*Self-reported by customer, confirmed afterwards.

**Updated January 2024 blog now reflects current findings

About the author

Blog

Network

June 27, 2025

Patch and Persist: Darktrace’s Detection of Blind Eagle (APT-C-36)

login on laptop dual factor authentication

What is Blind Eagle?

Since 2018, APT-C-36, also known as Blind Eagle, has been observed performing cyber-attacks targeting various sectors across multiple countries in Latin America, with a particular focus on Colombian organizations.

Blind Eagle characteristically targets government institutions, financial organizations, and critical infrastructure [1][2].

Attacks carried out by Blind Eagle actors typically start with a phishing email and the group have been observed utilizing various Remote Access Trojans (RAT) variants, which often have in-built methods for hiding command-and-control (C2) traffic from detection [3].

What we know about Blind Eagle from a recent campaign

Since November 2024, Blind Eagle actors have been conducting an ongoing campaign targeting Colombian organizations [1].

In this campaign, threat actors have been observed using phishing emails to deliver malicious URL links to targeted recipients, similar to the way threat actors have previously been observed exploiting CVE-2024-43451, a vulnerability in Microsoft Windows that allows the disclosure of a user’s NTLMv2 password hash upon minimal interaction with a malicious file [4].

Despite Microsoft patching this vulnerability in November 2024 [1][4], Blind Eagle actors have continued to exploit the minimal interaction mechanism, though no longer with the intent of harvesting NTLMv2 password hashes. Instead, phishing emails are sent to targets containing a malicious URL which, when clicked, initiates the download of a malicious file. This file is then triggered by minimal user interaction.

Clicking on the file triggers a WebDAV request, with a connection being made over HTTP port 80 using the user agent ‘Microsoft-WebDAV-MiniRedir/10.0.19044’. WebDAV is a transmission protocol which allows files or complete directories to be made available through the internet, and to be transmitted to devices [5]. The next stage payload is then downloaded via another WebDAV request and malware is executed on the target device.

Attackers are notified when a recipient downloads the malicious files they send, providing an insight into potential targets [1].

Darktrace’s coverage of Blind Eagle

In late February 2025, Darktrace observed activity assessed with medium confidence to be associated with Blind Eagle on the network of a customer in Colombia.

Within a period of just five hours, Darktrace / NETWORK detected a device being redirected through a rare external location, downloading multiple executable files, and ultimately exfiltrating data from the customer’s environment.

Since the customer did not have Darktrace’s Autonomous Response capability enabled on their network, no actions were taken to contain the compromise, allowing it to escalate until the customer’s security team responded to the alerts provided by Darktrace.

Darktrace observed a device on the customer’s network being directed over HTTP to a rare external IP, namely 62[.]60[.]226[.]112, which had never previously been seen in this customer’s environment and was geolocated in Germany. Multiple open-source intelligence (OSINT) providers have since linked this endpoint with phishing and malware campaigns [9].

The device then proceeded to download the executable file hxxp://62[.]60[.]226[.]112/file/3601_2042.exe.

Figure 1: Darktrace’s detection of the affected device connecting to an unusual location based in Germany.

Figure 2: Darktrace’s detection of the affected device downloading an executable file from the suspicious endpoint.

The device was then observed making unusual connections to the rare endpoint 21ene.ip-ddns[.]com and performing unusual external data activity.

This dynamic DNS endpoint allows a device to access an endpoint using a domain name in place of a changing IP address. Dynamic DNS services ensure the DNS record of a domain name is automatically updated when the IP address changes. As such, malicious actors can use these services and endpoints to dynamically establish connections to C2 infrastructure [6].

Further investigation into this dynamic endpoint using OSINT revealed multiple associations with previous likely Blind Eagle compromises, as well as Remcos malware, a RAT commonly deployed via phishing campaigns [7][8][10].

Figure 3: Darktrace’s detection of the affected device connecting to the suspicious dynamic DNS endpoint, 21ene.ip-ddns[.]com.

Shortly after this, Darktrace observed the user agent ‘Microsoft-WebDAV-MiniRedir/10.0.19045’, indicating usage of the aforementioned transmission protocol WebDAV. The device was subsequently observed connected to an endpoint associated with Github and downloading data, suggesting that the device was retrieving a malicious tool or payload. The device then began to communicate to the malicious endpoint diciembrenotasenclub[.]longmusic[.]com over the new TCP port 1512 [11].

Around this time, the device was also observed uploading data to the endpoints 21ene.ip-ddns[.]com and diciembrenotasenclub[.]longmusic[.]com, with transfers of 60 MiB and 5.6 MiB observed respectively.

Figure 4: UI graph showing external data transfer activity.

This chain of activity triggered an Enhanced Monitoring model alert in Darktrace / NETWORK. These high-priority model alerts are designed to trigger in response to higher fidelity indicators of compromise (IoCs), suggesting that a device is performing activity consistent with a compromise.

Figure 5: Darktrace’s detection of initial attack chain activity.

A second Enhanced Monitoring model was also triggered by this device following the download of the aforementioned executable file (hxxp://62[.]60[.]226[.]112/file/3601_2042.exe) and the observed increase in C2 activity.

Following this activity, Darktrace continued to observe the device beaconing to the 21ene.ip-ddns[.]com endpoint.

Darktrace’s Cyber AI Analyst was able to correlate each of the individual detections involved in this compromise, identifying them as part of a broader incident that encompassed C2 connectivity, suspicious downloads, and external data transfers.

Figure 6: Cyber AI Analyst’s investigation into the activity observed on the affected device.

Figure 7: Cyber AI Analyst’s detection of the affected device’s broader connectivity throughout the course of the attack.

As the affected customer did not have Darktrace’s Autonomous Response configured at the time, the attack was able to progress unabated. Had Darktrace been properly enabled, it would have been able to take a number of actions to halt the escalation of the attack.

For example, the unusual beaconing connections and the download of an unexpected file from an uncommon location would have been shut down by blocking the device from making external connections to the relevant destinations.

Conclusion

The persistence of Blind Eagle and ability to adapt its tactics, even after patches were released, and the speed at which the group were able to continue using pre-established TTPs highlights that timely vulnerability management and patch application, while essential, is not a standalone defense.

Organizations must adopt security solutions that use anomaly-based detection to identify emerging and adapting threats by recognizing deviations in user or device behavior that may indicate malicious activity. Complementing this with an autonomous decision maker that can identify, connect, and contain compromise-like activity is crucial for safeguarding organizational networks against constantly evolving and sophisticated threat actors.

Credit to Charlotte Thompson (Senior Cyber Analyst), Eugene Chua (Principal Cyber Analyst) and Ryan Traill (Analyst Content Lead)

Appendices

IoCs

IoC – Type - Confidence
Microsoft-WebDAV-MiniRedir/10.0.19045 – User Agent

62[.]60[.]226[.]112 – IP – Medium Confidence

hxxp://62[.]60[.]226[.]112/file/3601_2042.exe – Payload Download – Medium Confidence

21ene.ip-ddns[.]com – Dynamic DNS Endpoint – Medium Confidence

diciembrenotasenclub[.]longmusic[.]com - Hostname – Medium Confidence

Darktrace’s model alert coverage

Anomalous File / Suspicious HTTP Redirect
Anomalous File / EXE from Rare External Location
Anomalous File / Multiple EXE from Rare External Location
Anomalous Server Activity / Outgoing from Server
Unusual Activity / Unusual External Data to New Endpoint
Device / Anomalous Github Download
Anomalous Connection / Multiple Connections to New External TCP Port
Device / Initial Attack Chain Activity
Anomalous Server Activity / Rare External from Server
Compromise / Suspicious File and C2
Compromise / Fast Beaconing to DGA
Compromise / Large Number of Suspicious Failed Connections
Device / Large Number of Model Alert

Mitre Attack Mapping:

Tactic – Technique – Technique Name

Initial Access - T1189 – Drive-by Compromise
Initial Access - T1190 – Exploit Public-Facing Application
Initial Access ICS - T0862 – Supply Chain Compromise
Initial Access ICS - T0865 – Spearphishing Attachment
Initial Access ICS - T0817 - Drive-by Compromise
Resource Development - T1588.001 – Malware
Lateral Movement ICS - T0843 – Program Download
Command and Control - T1105 - Ingress Tool Transfer
Command and Control - T1095 – Non-Application Layer Protocol
Command and Control - T1571 – Non-Standard Port
Command and Control - T1568.002 – Domain Generation Algorithms
Command and Control ICS - T0869 – Standard Application Layer Protocol
Evasion ICS - T0849 – Masquerading
Exfiltration - T1041 – Exfiltration Over C2 Channel
Exfiltration - T1567.002 – Exfiltration to Cloud Storage